Calamp Installation Manual #
Protocol Details #
Default report rate is 9600/8/N/1
Example report: *XD,205B,00,0000,0032,0000,0000,0260#
Calamp 2xx0 configuration details
Changed S register 134 to 35 (termination character to 35(#) instead of 13 (\n))
Changed S register 141 changed from 0 to 6 to report every 6th message. This will be once per minute as the fuel level is reported every 10 seconds
Changed S register 135 changed from 200 to 36 to send single reports
Changed S register 136 changed from 0 to 1 to ID reports as UL200 reports
Required parts #
RS232 Male cable
Calamp Serial Adapter 133337/D3
1x Header 1445022-5
2x Pins 1-794610-1
